7/14/2023 0 Comments Novarm![]() SMA connectors are rated for up to 500 mating cycles, but to achieve this it is necessary to properly torque the connector when making the connection. For that reason and that they are just rated for a limited number of connection cycles, an SMA connector is not usually a good choice for metrological applications. Variability in the construction and the mating of the connectors limit the repeatability of the connector impedance. The SMA connector uses a polytetrafluoroethylene (PTFE) dielectric which will contact along the mating plane. There are also reverse-polarity ("RP") SMA connectors in which the pin and sleeve are swapped so that the "male" RP-SMA has a center sleeve surrounded by an inside-threaded barrel, and the "female" RP-SMA has a center pin and an outside-threaded barrel. As with most other connectors, the gender assignment thus corresponds to the innermost electrical component. The male is equipped with a hex nut measuring 5/16 inch (0.3125 inch / 7.9 mm) across opposite flats, thus taking the same wrench as a #6 SAE hex nut.Ī standard-polarity SMA male connector has a center pin surrounded by barrel with inside threads, and the standard SMA female connector has a center sleeve surrounded by a barrel with outside threads. The SMA connector employs a 1/4-inch diameter, 36-thread-per-inch threaded barrel. ![]() The SMA name is also used for a superficially similar optical fiber connector. Type F cannot be mated with SMA this connection is possible using an adapter. SMA connectors can be visually confused with the standard household 75-ohm type F coax connector (diameters: Male 7⁄16 inch (11 mm) circular or hex female 3⁄8 in (9.5 mm) external threads), as there is only about a 2 mm difference overall in the specifications. It is also commonly used in radio astronomy, particularly at higher frequencies (5GHz+). SMA is designed for use from DC to 18 GHz, but is most commonly used for hand-held radio and mobile telephone antennas, and more recently with WiFi antenna systems and USB software-defined radio dongles. SMA ( SubMiniature version A) connectors are semi-precision coaxial RF connectors developed in the 1960s as a minimal connector interface for coaxial cable with a screw-type coupling mechanism. Standard male SMA connector: male body (inside threads) with male inner pin.
0 Comments
Leave a Reply. |